Model UAV: RD-7 (Codenamed: FireEyes )
|
+1 this on Google |
 Share this Model using Facebook |
 Follow this Model using RSS |
Current Objectives for this Model
Model Components
Air Frame: Snap Quad Frame
Flight Controller: HobbyKing Quadcopter Control Board V2 (Atmega168PA) (KK Clone)
FireEyes
Flight Testing
This Model is still in development, Any component in use is subject to change without notice or explanation.
Snap-Quad
39.00 cm
Quadcopter +
None Installed At This Time
None Installed At This Time
None Installed At This Time
None Installed At This Time
None Installed At This Time
None Installed At This Time
Turnigy Nano 2200mah 3S 45~90C Lipo
Hobby King 30A ESC 3A UBEC
Gaui 8A/8B Counter Rotating Sets
Futaba 9C Super - DM8 (Spektrum)
None Installed At This Time
OrangeRx R410 Spektrum DSM2 4Ch 2.4Ghz
RD7 - Build out
I installed Motors, ESC, KK flight controller and DM2 4ch rx, Guai Props. Test flights show that KK needs tuning.
RD-7
Model Flight Logs
Newest at the top, oldest at the bottom.
several attepmts to fly this model. each one failed, It is likely that the cause is the flight controller.
We Love Wikipedia
Advertisement:
|
|
 |
|---|
Jump down to...
Model Photos
