Model UAV: RD20 (Codenamed: CloudsFly )
|
+1 this on Google |
 Share this Model using Facebook |
 Follow this Model using RSS |
Current Objectives for this Model
- Install a Revo into this bird for automated flight testing
Model Components
Flight Controller: OpenPilot Revolution
CloudsFly
Currently In Development
This is big enough it should be able to haul a gopro or an APM.
On the first flight, it did 3 loops before I got it under control, the CofG was way off and now needs to be adjusted before further flight.
Specifications:
Wingspan: 1290mm Fuse
Length: 860mm
Motor: 2100Kv Outrunner
Propeller: 5x5inch
ESC: 20A
Servos: 4 x 9g servo for Rudder, Elevator, 2x Aileron (HXT900 9g / 1.6kg / .12sec Micro Servo)
Fixed Wing
Fixed Wing - Powered Glider
None Installed At This Time
None Installed At This Time
None Installed At This Time
None Installed At This Time
None Installed At This Time
None Installed At This Time
None Installed At This Time
H-KING 20A Fixed Wing Brushless Speed Controller
None Installed At This Time
Futaba 9C Super - DFT (FrSky)
None Installed At This Time
FrSky DR8 II (no PPM, No telem)
Model Flight Logs
Newest at the top, oldest at the bottom.
There are no flight logs for this model.
We Love Wikipedia
Advertisement:
|
|
 |
|---|