Model UAV: RD25 (Codenamed: Pinky )
|
+1 this on Google |
 Share this Model using Facebook |
 Follow this Model using RSS |
Current Objectives for this Model
- Evaluate this, strong but light and cheap, budget (less than $30) frame - So far, EXCELLENT!!!
Model Components
Flight Controller: Kkmulticopter V5.5 Controller BlackBoard
from the vendor:
- Made by High strength toughness engineering nylon and Aluminium alloy
- Can support 20kg weight in central
- Length:525MM (opposite angles)
- Folding design ,High precision high strength
- Easy to set up ,The performance is stable
- Supports 4-axis "+" and "X" flight mode
- Weight:350gram
RD25 - We unpack the frame parts.
Well the box was kind of squashed:
but the contents were not damaged at all
Most of the components came is strong bags that oddly enough were all cut open, I think they actually count parts to make sure,
Regardless all components seem to be there, only a finished build will confirm that.
The laser cut composite parts have protective paper on them like on plexiglass, but to avoid glue they use a water based adhesive so parts need a quick soak, then the paper comes off. word of advice, do not scrape and soak 5 minutes in warm water, not cold for 1 minute as it says, use a soft scrub brush not your finger nail or a coin as this will scratch the composite.
If you follow my advice parts come out very nice.
The laser engraved shows its made by FunJet with their logo and identifies the model number on the other end.
Thats it until I build it.
Model Flight Logs
Newest at the top, oldest at the bottom.
There are no flight logs for this model.
We Love Wikipedia
Advertisement:
|
|
 |
|---|
